A roof replacement estimate tool for your website and team. Price roof squares, waste and tear-off with your rates.
Type the address and pick it from the suggestions.
Answer 4 questions about the job, then choose “Measure my roof”. A detached building can be included separately.
See the roof area and a price range using your rates. Check the measured area and the job answers before sending the price.
The homeowner sends contact details with the estimate. They can pick a time if you have added a booking link.
Roof area
Your widget asks these before it shows a price, in your colors. The answers come with the lead.
New roof material: Asphalt shingle. Stories: 1 story. Existing roof: Not sure. Existing roof layers: One.
| Item | Quantity | Amount |
|---|---|---|
| New asphalt shingle roof | 27.4 squares | $12,339 |
| Tear off old roof | 23.4 squares | $2,109 |
| Rounding | — | $2 |
| Estimate | $14,450 | |
Rounded to the nearest $50.
Range shown: $12,300 to $16,600
$12,300 to $16,600
Shown before any contact form.
412 Sample Ridge Ct
Roseville, CA
Jordan Example
(916) 555-0114
Range shown: $12,300 to $16,600
Sample house, sample rates. See a sample report
Per square (100 sq ft of roof), including underlayment.
Applies to the roof squares on sections steeper than this. Tear-off is unchanged.
The homeowner sees the estimate plus or minus this much, depending on how clear the roof data is.
New widgets start with sample rates. Estimates run once you enter your own. Advanced settings: waste by roof type, measurement correction.
Enter an address and get the measurements, line items and a total from your rates. Check the job on site before you send the final price.
See a sample estimateHomeowners answer a few questions and see a price range. When they send the form, you get the lead. If a house can't be measured from above, they can still ask for a visit.
See the homeowner workflowMeasure a house, download a template or work through a pricing guide.
From aerial roof data, plane by plane, with each plane's slope included. You get the sloped area in squares.
You set a waste percent for each roof type. Hip and complex roofs usually need more than a simple gable.
The homeowner picks one layer or two or more, and tear-off is priced per layer.
Set the pitch where steep starts and a multiplier. It applies only to sections over that pitch.
No. It prices retail replacements with your rates. It doesn't produce insurance or Xactimate estimates.
Each trade has its own questions and pricing. You can run more than one on the same account. Figures are measured on the same sample house.
Type the address. Your free account measures it, and you can price it with your own rates.
