Permanent lighting quoting software for year-round installations. Price the front of the house, the front and sides, or all the way around, with optional peaks and your rates.
Type the address and pick it from the suggestions.
Answer 3 questions about the job, then choose “Measure my roofline”. A detached building can be included separately.
See the roofline footage and a price range using your rates. Light runs are numbered. Remove a run or draw one to match the job.
The homeowner sends contact details with the estimate. They can pick a time if you have added a booking link.
Roofline footage
Your widget asks these before it shows a price, in your colors. The answers come with the lead.
Coverage: Front. Stories: 1 story. Include roof peaks: Yes.
| Item | Quantity | Amount |
|---|---|---|
| Permanent light track | 49 ft | $1,372 |
| Roof peaks (estimated) | 18 ft | $504 |
| Controller, power and app setup | Included | $600 |
| Minimum job price | — | $24 |
| Estimate | $2,500 | |
Minimum job price applies.
Range shown: $2,500 to $2,900
$2,500 to $2,900
Shown before any contact form.
412 Sample Ridge Ct
Roseville, CA
Jordan Example
(916) 555-0114
Range shown: $2,500 to $2,900
Sample house, sample rates. See a sample report
Per foot of roofline, installed.
The homeowner sees the estimate plus or minus this much, depending on how clear the roof data is.
New widgets start with sample rates. Estimates run once you enter your own. Advanced settings: roof peaks, measurement correction.
Enter an address and get the measurements, line items and a total from your rates. Check the job on site before you send the final price.
See a sample estimateHomeowners answer a few questions and see a price range. When they send the form, you get the lead. If a house can't be measured from above, they can still ask for a visit.
See the homeowner workflowMeasure a house, download a template or work through a pricing guide.
The front is the side that faces the street, found from the address. When the street side isn't clear, the runs are shown on the map to pick by hand. Choose the front of the house, the front and sides, or all the way around. Edit the runs to match the job.
If the homeowner asks for them. On gable roofs the peak length comes from the roof's width and pitch. On complex roofs it's estimated, and the estimate says so.
It's one fee per job that you set, shown as "Controller, power and app setup".
You set a price per foot for 1, 2 and 3+ stories.
Yes. You set a minimum job price, and estimates below it are raised to it.
Each trade has its own questions and pricing. You can run more than one on the same account. Figures are measured on the same sample house.
Type the address. Your free account measures it, and you can price it with your own rates.
