Measure the eaves and gable ends from an address. Price new fascia boards, aluminum wrap, soffit or paint per foot with your rates, for your team or on your website.
Type the address and pick it from the suggestions.
Answer up to 4 questions about the job, then choose “Measure my roofline”. A detached building can be included separately.
See the eave and gable-end footage and a price range using your rates. Eave runs are numbered. Remove a run or draw one to match the job.
The homeowner sends contact details with the estimate. They can pick a time if you have added a booking link.
Eave and gable-end footage
Your widget asks these before it shows a price, in your colors. The answers come with the lead.
Job type: Fascia + soffit. Fascia: Replace boards. Stories: 1 story. Include rakes: Yes.
| Item | Quantity | Amount |
|---|---|---|
| New fascia boards | 118 ft | $1,652 |
| Fascia boards, gable ends (estimated) | 35 ft | $490 |
| New soffit | 118 ft | $1,770 |
| Rounding | — | -$12 |
| Estimate | $3,900 | |
Rounded to the nearest $50.
Range shown: $3,350 to $4,500
$3,350 to $4,500
Shown before any contact form.
412 Sample Ridge Ct
Roseville, CA
Jordan Example
(916) 555-0114
Range shown: $3,350 to $4,500
Sample house, sample rates. Try the fascia and soffit demo
Per foot of fascia: the eaves, plus the sloped gable ends when they're included.
Per foot of eave. Gable ends have no soffit.
Per foot, wrapped over the existing boards. Homeowners can choose wrap once all three prices are filled in.
Per foot of fascia line, painting the existing fascia and soffit. Homeowners can choose painting once it's filled in.
Applies only to fascia, soffit and paint feet under roof sections steeper than this. Removal is unchanged. Leave both fields blank to turn it off.
The homeowner sees the estimate plus or minus this much, depending on how clear the roof data is.
New widgets start with sample rates. Estimates run once you enter your own. Advanced settings: gable ends, measurement correction.
Enter an address and get the measurements, line items and a total from your rates. Check the job on site before you send the final price.
See a sample estimateHomeowners answer a few questions and see a price range. When they send the form, you get the lead. If a house can't be measured from above, they can still ask for a visit.
See the homeowner workflowMeasure a house, download a template or work through a pricing guide.
It depends on the material, the story height and what's behind the old boards. In Measured Bid you set your own per-foot price for fascia, wrap, soffit and paint at each story, and eaves on a lower roof use the rate one story down. The fascia and soffit pricing guide works a rate out from your own costs.
Measured Bid traces the eaves in aerial roof data and numbers each run. Soffit is priced on the eaves. Fascia is priced on the eaves plus the gable ends when they're included. Check the runs and draw any that are missing.
Yes. Set a per-foot wrap rate for each story and homeowners can choose between replacing the boards and wrapping them. If they aren't sure, the estimate prices new boards and says you'll confirm at the visit.
Yes, once you set a paint rate per foot. Painting is priced on the same fascia line: the eaves plus the gable ends.
Your choice. Leave the removal rate blank if tear-out is in your replacement prices, or set a rate per foot of board replaced and it shows as its own line. Wrap and paint jobs never get a removal line.
Each trade has its own questions and pricing. You can run more than one on the same account. Figures are measured on the same sample house.
14 days or 5 estimates free, whichever comes first. No card needed.
